REAR-MOUNT BOOM BRUSH CUTTER RME-22

Hitch Type – CAT II (CAT II Quick Hitch adaptable) or CAT III 3-point hitch

Transportation Width – 101″

Transportation Length – 96″

Transportation Height – 140″

Oil Reservoir Capacity – 50 gal.

Horizontal Reach – 22′

Vertical Reach – 21′

Down Reach -14′

Front to Back Pitch – 108″

Operating Pressure – 2,700 PSI

Pitch of Mower Head – 120°

Deck Thickness – 7 gauge”

Skid Shoe Thickness – 3/8″

Weight (Approximate) – 3,250 lb. W/O oil

Tractor HP Requirements – 90 HP PTO, 11,500 lb minimum tractor weight.

Tractor PTO – 540/1,000 RPM

Cutter Shaft Speed – 980 RPM

Hoses – 2″ ID suction line, 1″ ID pressure line

Control Valve – Proportional 5 bank valve with load sensing capability and manual override built-in.

Control – Proportional computer-controlled joystick which controls 4 axis of motion. Toggle switch
used for mower head with emergency stop override.

Power – 94 HP at a speed of 2,025 RPM

Hydraulic Filters – 140 Micron suction filter located inside the tank; 10-micron spin-on type return
filter with restriction gauge

Hydraulic System – Totally independent

Hydraulic Pump – Pressure compensated piston-type used to reduce the heat of the system produces a flow
rate of 42 GPM

Primary Boom Construction – 5/16 x 5 x 5 high-strength steel tubing

Dipper Boom – 5/16 x 4 x 5 high-strength steel tubing

Safety Breakaway – Built into hydraulic system (standard)

Quick Attach Boom Head

Quick Disconnects on Attachment Hydraulics

Optional 48″ Saw Blade Attachment

Optional hinged Door for 60″ Cutting Deck